serial high performance

Striker is a serial D-class high performance glider with a aspect ratio of 6,5. Developing Striker, we've put 25 years of experience into its design and flight characteristics.

The result of our efforts is a racing wing for competing cross country pilots as well as other performance oriented pilots. Striker shows up with a simple take-off handling, high top speed, high gliding performance and the typical independce handling: subtle and well modulated.

Strikers flight characteristics under extreme conditions are, at least for a D-class wing, outmost even-tempered!

  • Performance oriented profile
  • Well arranged line setup - minimised air drag
  • 3 line levels per carrying strap
  • Dirt outlet ports at stabiliser
  • Clearly marked risers
  • Hard-wearing, durable Dominico D20 fabric
  • We only use high grade material of renowned manufacturers for our wings
  • Accurate production in one of the most advanced manufacturing plants
size S/M M/L L
cells 68 68 68
surface measure (m²) 25,5 27,5 29,5
surface projected (m²) 21,8 23,58 25,3
wing-span (m) 12,89 13,39 13,87
aspect ratio 6,5 6,5 6,5
trim speed (km/h) 39 +/- 1 39 +/- 1 39 +/- 1
max. speed (km/h) 57 +/- 2 57 +/- 2 57 +/- 2
weight range(kg) 70 - 90 85 - 110 100 - 125
certification category (EN and LTF) D D


upper canvas Dominico 20D soft finish
lower canvas Dominico 20D soft finish
profile Dominico 30D FM hard finish
diagonal ribs Dominico 20D FM hard finish
line Liros Dyneema PPSL: 200/160 (lower lines)
Liros Technora TC 160 (lower lines)
Liros Dyneema DC: 100/60 (middle/top cascade)
Liros Dyneema DC 60 (brake middle/top cascade)
Edelrid Dyneema 10/N300 (steering line)
line locks Maillon Rapide inox 3,5 mm


Striker is a thoroughbred mile-cruncher for distance chasers, thus designed for pilots demanding maximum performance of a certified wing.

No, Striker has an almost schooling capable take-off attitude. It can subtly be launched without any tendency to pullout or dash forward. Enjoy your flight from take-off to landing!

It is advisable to choose a size in order to reach high surface load. That does increase trim speed and gliding performance. Three available sizes enable you to choose the appropriate wing for your weight.

For Striker we have chosen material, which offered an ideal compromise on weight reduction, durability and robustness. Every material we use is mady by leading manufacturers, whom we have been working and cooperating with in development issues for many years. A solid basis for high quality and for your long lasting enjoyment of flying Striker.

For a detailed chart on material used please look at the chapter „technical data“.

Lines & accessory for this paraglider

  • Extremely light XC harness
  • Simple opening of speed bag
  • Very light parachute for huge total load
  • Extremely low sink rate, very fast opening

G-force brake parachute is made to reduce physical stress when flying spirals. It needs to be attached to your harness.

Reserve front container with a cockpit for your instruments.

Probably one of the easiest ways to pack a glider – quickly and compactly.

It is very simple to re-order line for your independence paraglider, when using the lines service provided in our online store.