Logo Pro+


The revised Logo Pro now is even lighter than before. It is a robust, reasonably priced harness. It provides an outstanding flying experience as well as free moving space, which makes it suitable especially for beginners and casual pilots. It comes up with an integrated reserve container and a large foam protector. Its low weight and small packed measure make it a compact all-round harness.

Easy takeoff and landing

Thanks to reduced and therefore simplified adjustment options and thanks to its perfect harness geometry, it makes take-off and landing easy for the beginner.

Optimal protection

The generously sized back protector provides optimum protection without restricting freedom of movement on the ground.

optimized rescuer closure

The Logo Pro+ has an integrated rescue container, which has received a new closure in the course of the redesign (cable instead of cotter pins).

ergonomic back part

The ergonomic back panel transfers any canopy feedback directly to the body.

  • Excellent seating comfort
  • Low weight of 3,7kg (size M)
  • During flight easily adjustable belts
  • Integrated rescue parachute container
  • Deployment bag with release handle
  • Replaceable, sturdy PVC bottom
  • Colour-coordinated leg and chest closures
  • Integrated, clearly visible drop-out safeguard
  • Large, easily accessible pocket
  • Friction-reduced accelerator slide
  • Very light, formfitting synthetic seat board
  • Easily accessible storage space
  • Magnet holder for speed bar
Size Small Medium Large
body height 155 - 170 cm 160 - 185 cm 180 cm - 205 cm
max. load 120 kg 120 kg 120 kg
harness weight 3,6 kg 3,7 kg 4,1 kg
suspension height 47 cm 49 cm 51 cm
seat board size (width x length) 36 cm x 36 cm 38 cm x 38 cm 40 cm x 40 cm
certification EN1651 & LTF 91/09 EN1651 & LTF 91/09 EN1651 & LTF 91/09

The sizes given only are references, as the individually suitable size differs according to physique and personal preferences.

fabric Honeycomb tissue & Cordura
risers 25 mm Polyester
leg and chest closures AustriAlpin Cobra
carabiner Edelrid Alias
idler pulley AustriAlpin
seat board synthetic; honeycomb design


Yes, that's exactly what Logo Pro is made for! A well-balanced tilting point and the special arrangement of belt loops make it possible. If you adjust the lenghts of leg belt loops properly, you simply need to lift your knees in order to slip into the harness. And so is the landing.

Due to its well-balanced suspension height and ergonomic seating, Logo Pro provides comfortable seating and conveyc nuanced canopy feedback. Thus even small heavers can be recognised and used to gain altitude.

Yes. The deployment bag meets the current LTF requirements, thus is compatible with all common rescue systems (annular and cruciform parachutes).

No. Even if you compress the harness heavily in the pack, the foam unfolds again within a few seconds. However, at low outdoor temperatures, this can sometimes take a little longer.

If the Logo Pro is not used for a longer period of time, it is recommended to take the harness out of the pack or to store it only slightly compressed.

Yes. Integrated rubber bands run in the harness, which shorten the accelerator rope. A detailed description can be found in the operating instructions.

Suitable products and accessory for this harness

  • Light rescue parachute for mid-range total load
  • Low sink rate
  • Light rescue parachute for heavy total load
  • Very low sink rate, very fast opening
  • The new airborne sports helmet Hi-Tec
  • Certified according to EN 966 HPG

Towing device SK2 with integrated towing support.

The independence cockpit for attachment to the harness. Perfect for stowing all the things you need during the flight.

  • Basic accelerator with one tread and integrated magnet.