Paragliding harness: Logo (detail)

The newly revised Logo Easy became an even lighter, yet robust harness. It provides outstanding moving space on the ground and is especially suitable as passenger harness and for practising purposes. It is made of light and sturdy honeycomb tissue, its bottom side is reinforced and it has a large foam protector. A small packing measure combined with an optional front container make it a compact all-rounder.

Harness Logo Easy


Clearly arranged belts mark our Logo harnesses. Minimised adjustments and perfect belt geometry are basis for smooth motion sequences during take-off and landing.

The back protector of Logo Easy is generously dimensioned, thus provides optimum safety without constraining the pilots movements. The robust PVC bottom side is replaceable as it is fixed with a hook-and-loop tape - the ideal harness for beginners, who don't always achieve smooth landings when starting their flight training. And it is suitable for ground handling and as passenger harness, too.


  • Providing well-thought-out freedom of movements on the ground
  • Low weight of 3.8 kg (size M)
  • Reduced adjustments for simple handling
  • Colour-coordinated leg and chest closures
  • Replaceable, sturdy PVC bottom
  • Integrated, clearly visible drop-out safeguard
  • Large, easily accessible pocket
  • Friction-reduced accelerator slide
  • Very light, formfitting synthetic seat board
  • Easily accessible storage space
  • Duct for hydrotube within shoulder webbing
  • Radio pocket integrated to shoulder webbing
  • Magnet holder for speed bar

Technical data

Size Small Medium Large
body height 155 - 170 cm 160 - 185 cm 180 - 205 cm
max. load 120 kg 120 kg 120 kg
harness weight 3.7 kg 3.8 kg 4.2 kg
suspension height 47 cm 49 cm 51 cm
seat board size (width/length) 34 cm x 34 cm 36 cm x 36 cm 40 cm x 40 cm
certification EN1651 & LTF 91/09 EN1651 & LTF 91/09 EN1651 & LTF 91/09

The sizes given only are references, as the individually suitable size differs according to physique and personal preferences.

fabric Ripstop-Nylon & Cordura
risers 25 mm Polyester
leg and chest closures AustriAlpin Cobra
carabiner Edelrid Alias
idler pulley AustriAlpin
seat board synthetic



Is it possible to simply slip into /out of Logo Easy during take-off and landing?

Yes, that's exactly what Logo Easy is made for! A well-balanced tilting point and the special arrangement of belt loops make it possible. If you adjust the lenghts of leg belt loops properly, you simply need to lift your knees in order to slip into the harness. And so is the landing.

Is Logo Easy suitable as second harness for ground handling purposes or as passenger belt??

Of course it is. These are exactly the purposes Logo Easy has been designed for.

Logo Easy doesn't have any integrated rescue container. May I attach a front container to it?

Yes. You can attach an independence front container to Logo Easy or any other available front container. It only takes a few quick steps.

The manual explains exactly how to fix a rescue system. Unexperienced pilots should ask their dealer or flight instructor for help, as it is absolutely necessary to fix the recue system professionally.

Does it affect the foam protector's impact, if I fold up Logo Easy densely?

No. Even if you fold the harness compactly in order to pack it into a pack sack, the foam is going to unfold itself quickly within seconds. Only at very low temperatures it might take a bit longer to unfold properly.

If you don't use Logo Easy for a long period of time, it is advisable to store the harness unfolded and not to leave it in your pack sack.

Does Logo Easy have a system to pull back the accelerator pole to the edge of the seat board?

Yes. Integrated into the harness there are rubber bands, shortening the accelerator line. A detailed description is provided in the manual of Logo Easy.


Suitable products and accessory for this harness